Supply, cart, heat & spray prime (if required) = 1,850m2
AMC0 @ 0.9L/m2
Other Works by Offeror:
Supply and install "stick & stomps" (included with AC14H works).
Tack coat (if required) = 300 litres
Preparation of existing surface = 600m2.
Mill existing surface 50mm deep (resurfacing & key-ins) = 600m2
RoadTek will provide:
Site supervision, traffic management, road lighting, survey set-out.
Excavation & re-instatement of accesses (as works progresses).
Line marking.
General:
It is envisaged that all works to be carried out at night. Offerer is to provide a program of works with their tender. For example, assuming that the prime & PMB waterproof seals are omitted from the final works:
Night 1: C170 seal + two layers of AC20.
Night 2: AC14 intermediate layer.
Mill existing surface (driveways).
C170 seal to exposed areas (driveways).
AC14 surface layer (driveways).
Night 3: Mill existing surface (bike lane & key-ins).
C170 seal to exposed areas (bike lane & key-ins).
AC14 surface layer.
All work to be in accordance with current TMR Standard Specifications. A copy of these specifications is available from www.tmr.qld.gov.au or by contacting the project manager. Testing and quality assurance documents to be all undertaken by the offeror and submitted to RoadTek in a timely manner.
Offeror to advise if a transfer/shuttle buggy is included in the rate.