| Queensland Rail is undertaking a Cathodic Protection project which requires a Contractor with the capacity and capability to deliver Cathodic Protection for Three Steel Bridges (Burnett, Boyne & Kolan) project within the required timeframe with minimal risk to Queensland Rail.
Respondents who would like to download all documents and are interested in submitting a response, please follow the below instructions:
- Tenderers are to email the nominated Contact Officer (steven.kang@qr.com.au) to register to access the documents and online response form in the SAP Ariba eSourcing system. The documents, including Supplementary Conditions of Tendering and Principal Project Requirement for Cathodic Protection are available for download.
- If the Tenderer elects to submit a response, they must do so by using Queensland Rail's online sourcing tool (SAP Ariba eSourcing System).
- Respondents are encouraged to carefully read all documentation available for downloaded in the SAP Ariba eSourcing System.
Queensland Rail will only accept responses submitted via the SP Ariba eSourcing System.
For this sourcing event, Queensland Rail will provide an overview of the project for information only onto QTenders for all QTenders registered companies to review. The Respondent will need to determine if they would like to proceed to access the tender documents in the SAP Ariba eSourcing System. Queensland Rail will provide access to this sourcing event in the SAP Ariba eSourcing System when the documents are available to download from Friday 04 October 2019.
Project Overview – See attached Principal Project Requirement.
Mandatory Tender Site Inspections - See attached Supplementary Conditions of Tendering
Respondents will be required to attend a compulsory site inspection to ensure that all aspects of the proposed Works are inspected, that all limits/conditions affecting the proposed Works are identified, and that all requirements of the proposed Works are clear.
The Inspection will be held on Wednesday, 16 October 2019.
Registration of attendance is compulsory and must be confirmed with the Principal’s Representative no later than 4:00PM on Monday 14th October 2019.
Contractor Safety and Environment Prequalification
Contractors who will be engaged to perform works and/or services on Queensland Rail owned or leased property that are categorised at Category 1, 2 or 3 will need to successfully complete Safety and Environment Prequalification.
Based on the Works to be undertaken, the Safety and Environment Pre-qualification categorisation that will apply for the Cathodic Protection for Three Steel Bridges is Category 1.
- category 1 contractors, which is for contractors Queensland Rail appoints as Principal Contractors. Contractors that are entered on the Category 1 Register will prequalify for works that fall under categories 2 and 3 as well.
The validity of the prequalification is two (2) years and may be extended under certain conditions.
The submission of the questionnaire to Queensland Rail does not prequalify a respondent. Safety and Environment Prequalification involves a desktop level assessment of respondent’s safety and environment processes to meet Queensland Rail minimum expectations. Only respondents that are assessed to have met the requirements of the Safety and Environment Prequalification will prequalify.
Further information, including the questionnaire, is available on the Contracting to Queensland Rail website: https://www.queenslandrail.com.au/forbusiness/contractors.
|
