Display TMRPMG051920

For more detailed information on a particular section refer to the help specific to that section.

Times presented in this website are for Queensland (without daylight saving).

Detailed Help (Clicking detailed help will open a new browser window)
Slab compactor

Issued by Department of Transport and Main Roads

Invitation to Offer

Status: Closed
Mega Category: General goods and services
Number: TMRPMG051920
Released: Fri, 6 Mar 2020 at 3:05PM Brisbane, Queensland
Closed: Fri, 13 Mar 2020 at 5:00PM Brisbane, Queensland
UNSPSC: Laboratory and Measuring and Observing and Testing Equipment - (100%)
Region/s: Cairns & Far North Queensland
Mount Isa & North West Region
The Central West
South West & Darling Downs
Townsville
Mackay Whitsunday Region
Rockhampton
Gladstone
Wide Bay Burnett
South East Queensland

Section 1

Tender Overview

The Queensland Government is seeking Proposals for TMRPMG 05 1920.

Purchase and delivery of segmental wheel compactor suitable for compacting slabs of hot-mix asphalt, granular materials and stabilised materials.

Segmental wheel compactor suitable for compacting slabs of hot-mix asphalt, granular materials and stabilised materials. Complying with EN 12697-33 Bituminous Mixtures - Test Methods For Hot Mix Asphalt - Part 33: Specimen Prepared By Roller Compactor, Method 5.2 or ASTM D8079 Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor.

The mandatory requirements are:

Segmental wheel compactor consisting of the following:

Compaction device, capable of applying a loading of 1000 to 30,000 N to within 500 N, with the option for vibratory compaction and sufficiently rigid that it will not deform under load over the operating range.

The compaction device will be in the form of a freely rotating wheel segment. The compaction foot needs to be vertically moveable and set to a specified height above the base of the compaction mould.

Compaction table, having an oscillating speed of 10 to 25 oscillations per minute adjustable to within 1 oscillation per minute, and a travel of 200 to 450 mm adjustable to within 5 mm.

The table will have provision to attach the compaction mould.

Compaction moulds as follows:

4 x  metal moulds of internal dimensions 300 mm length, 300 mm width and 100 mm height with detachable collar.

2 x  metal moulds of internal dimensions 400 mm length, 300 mm width and 100 mm height with detachable collar.

Safety guards or sliding covers for moving parts would be desirable.

Having moulds capable of being fitted to a Coopers wheel tracker for testing would be desirable.

Options for heating compaction foot and moulds would be desirable.

For detailed information on the specific goods / services sought under this tender, please review the "Request for Quote" in "Section 3 - Here is the detail".

More about tendering here

Section 2

Still need help? Contact Us

Enquiries
users Carly McDonald
phone 30668169
email carly.r.mcdonald@tmr.qld.gov.au

Other Contacts
users Brian Lowe
Type Technical
phone PHONE: (07) 30666349
email ET_Procurement@tmr.qld.gov.au

Section 3

Here is the detail

If there are no documents listed in this section, please refer to Section 1 Tender Overview.

Documents can not be downloaded once Tender has closed.