Display QRP2045A

For more detailed information on a particular section refer to the help specific to that section.

Times presented in this website are for Queensland (without daylight saving).

Detailed Help (Clicking detailed help will open a new browser window)
Rail Grinding Services

Issued by Queensland Rail Limited

Forward Procurement Schedule

Status: Closed
Mega Category: Transport infrastructure and services
Number: QRP2045A
Released: Fri, 19 Jun 2020 at 12:00AM Brisbane, Queensland
Closed: Wed, 30 Sep 2020 at 2:00PM Brisbane, Queensland
Expected ITO Date:
UNSPSC: Construction and maintenance support equipment - (100%)
Region/s: Cairns & Far North Queensland
Mount Isa & North West Region
The Central West
South West & Darling Downs
Townsville
Mackay Whitsunday Region
Rockhampton
Gladstone
Wide Bay Burnett
South East Queensland

Section 1

Tender Overview

Rail Grinding Services QRP-20-45A

QRP-020-45A - Notification of an impending Queensland Rail - Tender QRP-20-45B for the Supply of Rail Grinding Services is expected be issued in late September – early October 2020.

This tender is specific to the rail grinding services for mainline and turnout grinding. The term of the contract will be five years, with approximate per annum volumes listed below.

Region

Mainline

(Kilometres)

Turnouts

(Each)

South East Queensland (SEQ)

850Km

285

North Coast Line (Cairns to Rockhampton)

100Km

10

North Coast Line South (Parana to Tamaree)

106Km

26

Townsville to Mt Isa   

295Km

40

West Moreton System (Toowoomba to Columboola).

34Km

20

The successful contractor will be required to:

  1. Hold accreditation as a rail transport operator as defined in the Rail Safety National Law (Queensland) Act 2017 (Qld);
  2. Meet Queensland Rail operational interface requirements (including a completed operating plan, certified load tables and configuration certificates etc.);
  3. Negotiate an Access Agreement with Queensland Rail to traverse the network and attend work sites;
  4. Have access to sufficient facilities (including provisioning, maintenance, and storage facilities) to enable it to run train services and meet work requirements.
  5. Have relevant Safety and Environment Pre-qualification to category 1.

Contractors are requested to review the process and requirements for access located on the Queensland Rail website:- https://www.queenslandrail.com.au/forbusiness/access

The access process may take several months depending on the particulars of the applicant’s operation. Contractors are encouraged to lodge a preliminary enquiry for access at the earliest opportunity when considering responding to the tender.

For pre-qualification ​Contractor Safety and Environment Management Program: Tenderers are advised they will be required to respond to a set of mandatory and non-mandatory questions listed within spreadsheet “MD-18-400 – Contractor Safety & Environment Prequalification Assessment: Category 1”.

The contractors and Safety and Environment Management Program “Category 1 Principal Contractor” can be found on Queensland Rail’s website. www.queenslandrail.com.au/forbusiness/contractors

Only an operator that can fulfil the requirements for Contractor Safety and Environment Management and Access (and can reasonably negotiate an Access Agreement with Queensland Rail) can be considered for the awarding of the rail grinding tender. All applicants will be subject to a best-fit evaluation against the Queensland Rail preferred operations model.

 

More about tendering here

Section 2

Still need help? Contact Us

Enquiries
users Robert Gardener
phone 30720850
email robert.gardener@qr.com.au

Other Contacts
users robert Gardener
Type Technical

Section 3

Here is the detail

If there are no documents listed in this section, please refer to Section 1 Tender Overview.

Documents can not be downloaded once Tender has closed.