Display QRP2045

For more detailed information on a particular section refer to the help specific to that section.

Times presented in this website are for Queensland (without daylight saving).

Detailed Help (Clicking detailed help will open a new browser window)
Rail Grinding Services

Issued by Queensland Rail Limited

Invitation to Offer

Status: Current
Mega Category: Transport infrastructure and services
Number: QRP2045
Released: Mon, 21 Sep 2020 at 12:00AM Brisbane, Queensland
Closing: Mon, 30 Nov 2020 at 2:00PM Brisbane, Queensland
UNSPSC: Refurbishing services - (100%)
Region/s: Cairns & Far North Queensland
Mount Isa & North West Region
The Central West
South West & Darling Downs
Townsville
Mackay Whitsunday Region
Rockhampton
Gladstone
Wide Bay Burnett
South East Queensland
Interstate
International

Section 1

Tender Overview

Queensland Rail is seeking to engage a Contractor to provide specialised Rail Grinding Services.

Queensland Rail manages over 6,500 km of track within its rail network including turnouts and requires ongoing rail grinding services to restore the rail profile on its network, remove irregularities from worn track, improve the ride comfort for our customers, reduce rail squeal for residents living close to our track infrastructure and ultimately extend the life of existing rail assets within our regional and metropolitan rail network.
The Queensland Rail Network comprises of the following regions:

  • South East Queensland (SEQ)
  • North Coast Line NCL (North) - Cairns-Rockhampton
  • North Coast Line NCL (South) - Parana - Tamaree
  • GNR – Townsville to Mt Isa
  • West Moreton System – Toowoomba to Columboola

 The successful Contractor will be required to:

  • Hold accreditation as a rail transport operator as defined in the Rail Safety National Law (Queensland) Act 2017 (Qld);
  • Meet Queensland Rail's operational interface requirements (including a completed operating plan, certified load tables and configuration certificates etc.);
  • Negotiate an Access Agreement with Queensland Rail to traverse the network and attend work sites;
  • Have access to sufficient facilities (including provisioning, maintenance, and storage facilities) to enable it to run train services and meet work requirements.
  • Have relevant Safety and Environment Pre-qualification to category 1.

Ariba Sourcing, Queensland Rail's tendering system, is the only tool that will be used for the receipt of tender submissions. Queensland Rail will not accept any hardcopy responses or responses bvia the Queensland Government QTender website.

Please download the attached Preamble, Ariba supplier's Guide v1.1 and Conditions of tender for further information on accessing the tender documents.

You can onle recieve the tender documents by emailing the relevant information required to:

Email:   robert.gardener@qr.com.au

Please:CC kevin.huang@qr.com.au

More about tendering here

Section 2

Still need help? Contact Us

Enquiries
users Robert Gardener
email robert.gardener@qr.com.au
Enquiries
users Kevin Huang
email kevin.huang@qr.com.au

Section 3

Here is the detail

If there are no documents listed in this section, please refer to Section 1 Tender Overview.

Documents can not be downloaded once Tender has closed.


Section 4

All finished? Please check and submit your response here

Give yourself the best chance

Step 1
Read through the tender description in Section 1
right arrow Step 2
Review the detailed tender information in Section 3 (if any)
right arrow Step 3
Complete ALL required tender documentation
right arrow Step 4
Check for quality in ALL your tender documentation

Closes at Mon, 30 Nov 2020 at 2:00PM Brisbane, Queensland

Submit your response in hardcopy to Not applicable - Please refer to Tender Documentation for instruction on lodging tender.

Section 5

Please help us to improve

The State Government is transforming the way we procure, including reducing red tape for our suppliers. Part of this is to reduce the complexity and the time it takes to complete tenders.

Complete Survey