Display QRP2116

For more detailed information on a particular section refer to the help specific to that section.

Times presented in this website are for Queensland (without daylight saving).

Detailed Help (Clicking detailed help will open a new browser window)
Traction Power Supervisory System Replacement Project

Issued by Queensland Rail Limited

Forward Procurement Schedule

Status: Expired
Mega Category: Information and communication technology
Number: QRP2116
Released: Wed, 17 Nov 2021 at 12:00AM Brisbane, Queensland
Closing: Thu, 2 Dec 2021 at 2:00PM Brisbane, Queensland
Expected ITO Date:
UNSPSC: Operating system software - (50%)
UNSPSC 2: Software or hardware engineering - (50%)
Region/s: Cairns & Far North Queensland
Mount Isa & North West Region
The Central West
South West & Darling Downs
Townsville
Mackay Whitsunday Region
Rockhampton
Gladstone
Wide Bay Burnett
South East Queensland
Interstate

Section 1

Tender Overview

Queensland Rail wishes to advise of an upcoming tender opportunity for the QRP-21-16 Traction Power Supervisory System Replacement project.

Queensland Rail currently operates a Supervisory Control and Data Acquisition (SCADA) system known as the Traction Power Supervisory System (TPSS) which is used to monitor and control the traction power supply along the electrified sections of the Queensland Rail network. The TPSS operates the hardware and software that connect the Electric Control Operator (ECO), located in the Rail Management Centre (RMC), to the field Remote Terminal Units (RTUs), located at each high voltage infrastructure site, ensuring network operations are conducted in accordance with electrical safety requirements. The current TPSS consists of two separate  Production CitectSCADA V6.1 with Queensland Rail TPSS Configuration.

The objective of this tender is to engage with a suitably qualified SCADA supplier to design and install an advanced TPSS replacement that is up-to-date and aligned with current industry standards. This will be a computer-based system for gathering and analysing real-time data to monitor and control High Voltage (HV) equipment that deals with critical and time-sensitive operations or events within our Traction Power Network. The new system will provide improved operational, network functionality and disaster recovery capability, increased capacity to accommodate network expansion and can operate in full redundancy mode. The system will be a SCADA system based on a Commercial off the Shelf (COTS) product.

Queensland Rail will be conducting a pre-tender information session to outline specific requirements and expected project outcomes.

The information session will take place virtually via Microsoft Teams at 10:00am AEST Thursday, 2 December 2021.

To register for this information session, please email timothy.goodberg@qr.com.au prior to 2:00pm Tuesday 30 November 2021.

 

More about tendering here

Section 2

Still need help? Contact Us

Enquiries
users Timothy Goodberg
email timothy.goodberg@qr.com.au

Section 3

Here is the detail

If there are no documents listed in this section, please refer to Section 1 Tender Overview.

Documents can not be downloaded once Tender has closed.